Sp Flash Tool Stuck On Download Da 100 _best_ May 2026

Avoid USB 3.0 (blue) ports; SP Flash Tool often prefers USB 2.0 ports .

Troubleshooting SP Flash Tool Stuck on "Download DA 100%" The "Download DA 100%" error is one of the most frustrating hurdles when flashing MediaTek (MTK) devices. While it looks like the process is finished because it reached 100%, the SP Flash Tool effectively freezes, and the yellow progress bar never starts. This usually indicates a communication breakdown between your PC and the device's bootloader. Why is SP Flash Tool Stuck?

Run the bypass tool, click "Disable Auth," and then connect your phone while holding the Volume buttons. Once the tool says "Success," immediately hit "Download" in SP Flash Tool. 4. Check Connection Settings

Use the original OEM cable or a high-quality data-sync cable.

A faulty USB cable or port providing power but not data.

How To install Sp Flash Tool -how to install sp flash tool in pc

If you are still stuck at 100% DA, you might be tempted to switch from "Download Only" to "Format All + Download." This will wipe your NVRAM/IMEI data , potentially leaving you with no cellular signal. Only use this as a last resort and ensure you have a backup of your device's original firmware.

Using an outdated version of SP Flash Tool for a modern chipset. Step-by-Step Solutions 1. Fix the VCOM Drivers

Use a tool like the MTK Auth Bypass Tool or MTK Meta Utility .

Download the latest MTK VCOM USB Drivers and install them manually. If you are on Windows 10 or 11, you must disable Driver Signature Enforcement before installing. 2. Use the Correct Download Agent (DA)