Work - Siruba+l818fm1+error+list+2021

If you encounter an error not listed above or if the code persists after the initial check, follow these general maintenance steps:

: Turn off the machine, unplug it from the wall, wait 30 seconds, and restart it to clear temporary glitches.

The motor power plug is loose or disconnected. Inspect the 4-pin motor cable. Input Signal Error siruba+l818fm1+error+list+2021

The machine head is tilted back or the safety switch is not in the correct position.

Check if the machine is jammed or if the thread is tangled in the hook. Ensure the motor can rotate freely. Over-Voltage If you encounter an error not listed above

The needle position detector is not sending a signal. Ensure the detector is properly aligned and plugged in. Solenoid Short-Circuit

Based on standard industrial control box documentation for the Siruba L818 series, here are the most frequent error codes you may encounter: Error Code Description Recommended Action Motor Stall / Overload Input Signal Error The machine head is tilted

Sewing Machine Error Code Guide | PDF | Power Supply - Scribd

: A bent or broken needle can cause mechanical resistance. Replace the needle if you suspect it is causing jams.

: Ensure all plugs on the back of the control box are seated firmly. Vibrations from industrial use can occasionally loosen cables.