Sc569-00 Ricoh __full__ Info

The pressure release motor may be locked due to an excessive load, or the motor driver itself could be defective.

Worn fuser films, damaged pressure rollers, or seized bearings can increase the physical load on the motor, causing it to stall.

Open the right-side door and verify that the fuser film and pressure roller are not physically damaged. sc569-00 ricoh

Before performing a software reset, inspect the following according to YYToner :

Because fusing-related errors are often flagged for safety, they frequently require a manual software reset even after the physical problem is resolved. 1. Hardware Inspection The pressure release motor may be locked due

Damaged harnesses or loose connectors between the motor/sensor and the control board. How to Fix and Reset SC569-00

When this error appears, it typically points to a mechanical or electrical failure within the fuser unit's pressure release system. Before performing a software reset, inspect the following

The pressure roller HP sensor (often designated as S26 or SEN60) may be disconnected, dirty, or defective.