A 10/100/1000 Mbps Ethernet port for your router. Power Jack: For the 12V DC power adapter. Reset Button: Recessed button to restore factory settings. 🚦 Understanding LED Indicator Lights
Once the PON light is solid green and the LOS light is off, your internet signal is ready. 🆘 Troubleshooting Common Issues Red LOS Light
The G-010G-R is a bridge-mode ONT. Unlike a standard "gateway," its primary job is to convert optical signals from fiber optic cables into Ethernet signals for your Wi-Fi router. Located at the bottom (SC/APC connector). nokia g-010g-r manual
Insert the fiber optic cable into the green PON port at the bottom. Warning: Do not look directly into the end of the fiber cable; the laser light can damage your eyes.
Do you need help to work with this Nokia ONT? A 10/100/1000 Mbps Ethernet port for your router
If the device is unresponsive, use a paperclip to press and hold the button for 10 seconds. Note that this may require your ISP to re-authenticate the device on their network. 📋 Technical Specifications Model: G-010G-R Standard: ITU-T G.984 GPON Wall Mountable: Yes Power Consumption: Under 5W Operating Temp: -5°C to 45°C (23°F to 113°F) Which ISP (Internet Service Provider) are you using?
Plug one end of a Cat5e or Cat6 Ethernet cable into the LAN port of the Nokia ONT and the other end into the WAN port of your Wi-Fi router. 🚦 Understanding LED Indicator Lights Once the PON
A device (like a router) is connected to the Ethernet port. Flashing Green: Data is currently being transmitted. Off: No device detected in the Ethernet port. 🔧 Installation and Setup