Linkrunner At 2000 Firmware Update -

A standard USB cable is needed to connect the tester to your computer.

The update takes about 5 minutes. The unit will reboot automatically; do not disconnect the USB cable until the Manager software confirms the process is finished. Why Keep Your LinkRunner Updated?

If you haven't already, download and install the latest LinkRunner AT Manager software from the same portal. linkrunner at 2000 firmware update

Scroll down to or look for a similar info option.

The current version (e.g., v2.4.3 or v2.5.4) will be displayed on the screen. A standard USB cable is needed to connect

Before you begin the update process, ensure you have the following:

To see if an update is necessary, check your current version directly on the device: Power on your LinkRunner AT 2000. Navigate to the menu. Why Keep Your LinkRunner Updated

Connect your LinkRunner AT 2000 to your PC using the USB cable.

On the device itself, go to Tools > Firmware Update and press Select (or F1) to put it into update mode. Run the Update via Manager: Open the LinkRunner AT Manager on your PC. Click Tools > Update Firmware . Browse to and select the downloaded firmware .zip file. Click Update .