A standard Cat5/6 cable for Ethernet and shielded twisted pair (24 AWG) for RS-485 downstream communication.
Label and unplug the field wiring and the power/comm board connectors from the legacy CPU.
Legacy CASI M Series boards cannot be mixed with Lenel M Series boards in the same controller; if you convert a controller, all boards within it must be upgraded to the Lenel M Series. 2. Physical Installation Steps To install or migrate to the LNL-3300-M5 Lenel Lnl-3300-m5 Installation Manual UPD
Before beginning, ensure you have the following requirements and tools: 12 VDC ± 10% at approximately 300mA.
Completely power down the legacy controller and disconnect the backup battery. A standard Cat5/6 cable for Ethernet and shielded
: Mount the new board onto the existing standoffs in the enclosure.
The board is designed to retrofit into legacy CASI M5/M3000 enclosures. : Mount the new board onto the existing
Lenel LNL-3300-M5 Installation & Migration Guide The Lenel LNL-3300-M5 Go to product viewer dialog for this item.
Plug in the 12 VDC power input, cabinet tamper input, and AC power fail inputs. The LNL-3300-M5 is one-for-one plug compatible with these connections. 3. Initial Configuration & IP Setup LNL-3300-M5 - Stebilex Systems
OnGuard software must be licensed and configured for the LNL-3300 series.