~repack~ — Ipiella3 Manual

If the system fails to post (boot), check the following common failure points:

SATA II (3.0 Gb/s) connectors for hard drives and SSDs. ipiella3 manual

To avoid damaging the sensitive electronics, follow these preparation steps: If the system fails to post (boot), check

Align the notches on the processor with the tabs on the socket. Gently lower the CPU into place without applying pressure. Close the load plate and lock the lever. Open the clips on the DDR3 slots. ipiella3 manual

Connect the front panel headers (Power Button, Reset Button, and HDD LED) according to the markings on the board's lower-right edge.