Hyt Tc-320 Programming Software 2021 [PREMIUM ✮]

Connect the programming cable to a USB port on your computer. Plug the Mini-USB end into the side of the TC-320. and set the volume to about 50%. 2. Identify the COM Port

A progress bar will appear. Do not unplug the cable or turn off the radio during this process, as it could "brick" the device. Once finished, the radio will usually restart or beep. Common Troubleshooting

This pulls the current frequency map and settings into the software. as a backup before you edit anything. 4. Editing Frequencies and Features hyt tc-320 programming software

While the TC-320 is "plug-and-play" out of the box with 16 pre-set channels, using the dedicated allows you to:

Ensure the radio is turned ON . Also, check that the cable is pushed firmly into the Mini-USB port; some protective cases or dust covers can prevent a flush connection. Connect the programming cable to a USB port on your computer

This is usually a driver issue or the wrong COM port selection. Re-check the Device Manager.

Adjust the Squelch level (usually set to 3 or 5) and the Time-Out Timer (TOT) to prevent accidental long transmissions. 5. Writing to the Radio Once finished, the radio will usually restart or beep

Tweak power consumption to extend your shift life. Prerequisites: What You’ll Need