You can load this machine by clicking on the "My machines" button
Avoid leaving lithium batteries completely discharged for long periods. Charge them to at least 50% for long-term storage. 5. Troubleshooting Common Issues
Select the appropriate (e.g., VRS or Nearest) to receive corrections. 3. Using Hi-Survey Road Software
Located inside the battery compartment, this is essential if you plan to use the internal GSM network for CORS connections. 2. Setting Up the Base and Rover hitarget v30 plus manual
The manual outlines two primary methods for communication: (radio) and Network RTK (CORS). Internal UHF Setup (Base & Rover)
The V30 Plus features a simplified interface with status lights for Satellites, Bluetooth, Data Link (UHF/Network), and Power. Troubleshooting Common Issues Select the appropriate (e
Once you reach a "Fixed" solution status, use the "Point Survey" or "Topo Survey" icons to begin logging data.
One of the standout features is the dual-battery slot. The system supports "hot-swapping," meaning you can replace one battery while the unit is running without losing your fix. Data Link (UHF/Network)
Always start by creating a new project and selecting the correct Coordinate System . If you are working in a local grid, you will need to perform a Site Calibration (Control Point Alignment).
Attach the rover to the range pole. Set its data link to "Internal UHF" and ensure the frequency and protocol (e.g., HI-TARGET or TRIMTALK) match the base exactly. Network RTK (NTRIP)
While the V30 Plus is IP67 rated (waterproof), always wipe down the pins and battery contacts if the unit has been used in heavy rain.
This action cannot be undone.
This action cannot be undone.
You can load this machine by clicking on the "My machines" button
As a teacher I wanted to give assignments to my students, but (IMHO) the available simulators were not intuitive enough. We worked out the first version of this simulator with José Antonio Matte, an engineering student at PUC Chile. The simulator was functional but a bit unstable, so I created this second version. Please let me know if the simulator is being used in new institutions. If you find any bugs or have comments feel free to contact me.
Avoid leaving lithium batteries completely discharged for long periods. Charge them to at least 50% for long-term storage. 5. Troubleshooting Common Issues
Select the appropriate (e.g., VRS or Nearest) to receive corrections. 3. Using Hi-Survey Road Software
Located inside the battery compartment, this is essential if you plan to use the internal GSM network for CORS connections. 2. Setting Up the Base and Rover
The manual outlines two primary methods for communication: (radio) and Network RTK (CORS). Internal UHF Setup (Base & Rover)
The V30 Plus features a simplified interface with status lights for Satellites, Bluetooth, Data Link (UHF/Network), and Power.
Once you reach a "Fixed" solution status, use the "Point Survey" or "Topo Survey" icons to begin logging data.
One of the standout features is the dual-battery slot. The system supports "hot-swapping," meaning you can replace one battery while the unit is running without losing your fix.
Always start by creating a new project and selecting the correct Coordinate System . If you are working in a local grid, you will need to perform a Site Calibration (Control Point Alignment).
Attach the rover to the range pole. Set its data link to "Internal UHF" and ensure the frequency and protocol (e.g., HI-TARGET or TRIMTALK) match the base exactly. Network RTK (NTRIP)
While the V30 Plus is IP67 rated (waterproof), always wipe down the pins and battery contacts if the unit has been used in heavy rain.