Evoko Liso Factory Reset Verified !!link!! · Original & Legit

: Use a tool like balenaEtcher or Win32 Disk Imager .

If you still have access to the device and only need to change settings without a full wipe, use the : Tap the Menu/Information icon on the screen. evoko liso factory reset verified

Insert a USB drive (at least 4GB; note that Kingston drives are often incompatible with Liso). Select the downloaded .gz image and flash it to the drive. : Use a tool like balenaEtcher or Win32 Disk Imager

To perform a on an Evoko Liso room manager , you must use a bootable USB flash drive containing the official firmware reset image . Unlike many consumer devices, the Evoko Liso does not have a simple "factory reset" button; the pinhole on the bottom of the unit is for rebooting only and will not wipe data or configuration settings. 1. Prepare the Reset USB Drive Select the downloaded

This process will erase all configuration, unpair the device from Evoko Home , and revert the firmware to the version on the USB.

: Reconnect the power. The Liso will automatically detect the USB drive and display a 30-second countdown before starting the flash.

: Wait for the message: "Flash has been successfully completed!" .