Features two E+L Full CAN interfaces for connecting sensors and an APIX interface that supports up to two CCD cameras (typically type OL 82 ) with a high data exchange rate of 500 MBit/s.
Equipped with a powerful processor, 1 GByte of RAM, and 4 GByte of internal memory to handle high-speed data processing.
The unit displays error messages in plain text or through status LEDs. Red "Operational" LEDs often indicate calibration failures or communication issues on the CAN bus. Camera computer DO 82 - Erhardt+Leimer
You can find relevant data sheets and technical documentation directly on the Erhardt+Leimer DO 82 product page .
Operates on a nominal voltage of 24 V DC with a current consumption of approximately 0.6 A when two cameras are connected.
Built-in Ethernet connectivity allows for direct integration into a factory's user network, enabling real-time monitoring and data management.
It detects material edges or printed contrast lines to ensure the web remains centered or aligned to a specific path.
Using the web-based "Setup Editor" to define parameters such as camera focal length (28mm or 50mm) and signal processing intervals.
The system can detect up to 32 different events within its measuring range simultaneously, such as detecting high-contrast patches or material defects.
By analyzing the data from multiple cameras, the system can measure the exact width of a moving web in real-time with sub-pixel accuracy.
Features two E+L Full CAN interfaces for connecting sensors and an APIX interface that supports up to two CCD cameras (typically type OL 82 ) with a high data exchange rate of 500 MBit/s.
Equipped with a powerful processor, 1 GByte of RAM, and 4 GByte of internal memory to handle high-speed data processing.
The unit displays error messages in plain text or through status LEDs. Red "Operational" LEDs often indicate calibration failures or communication issues on the CAN bus. Camera computer DO 82 - Erhardt+Leimer
You can find relevant data sheets and technical documentation directly on the Erhardt+Leimer DO 82 product page .
Operates on a nominal voltage of 24 V DC with a current consumption of approximately 0.6 A when two cameras are connected.
Built-in Ethernet connectivity allows for direct integration into a factory's user network, enabling real-time monitoring and data management.
It detects material edges or printed contrast lines to ensure the web remains centered or aligned to a specific path.
Using the web-based "Setup Editor" to define parameters such as camera focal length (28mm or 50mm) and signal processing intervals.
The system can detect up to 32 different events within its measuring range simultaneously, such as detecting high-contrast patches or material defects.
By analyzing the data from multiple cameras, the system can measure the exact width of a moving web in real-time with sub-pixel accuracy.
