Tool V3600 [updated]: Download Canon Service

Before attempting to use the software, you must put your Canon printer into Service Mode. This is a special boot state that allows the software to communicate with the hardware. Turn off the printer but keep it plugged in.

🚀 Never attempt to use this tool over Wi-Fi. A stable wired connection is required to prevent data corruption during the reset process.

While this tool is highly effective for models like the Canon MG series, IP series, and early IX series, users with modern G-series or Maxify printers should look for newer versions of the Service Tool, such as V5103 or higher, to ensure full compatibility and safety. download canon service tool v3600

Press and hold the Resume button (usually marked with a triangle icon). While holding Resume, press and hold the Power button.

The V3600 version is legacy software. It is optimized for Windows XP, Windows 7, and Windows 8. Users on Windows 10 or 11 may need to run the application in "Compatibility Mode" to ensure it functions correctly. Before attempting to use the software, you must

Release both buttons. The power light should blink and then stay solid, indicating Service Mode is active.

Release the Resume button while still holding the Power button. Press the Resume button 5 times in quick succession. 🚀 Never attempt to use this tool over Wi-Fi

Displays the specific firmware version and serial number of the connected device. How to Use the Utility Safely

Once the printer is in Service Mode, connect it to your PC via a USB cable. Open the Service Tool V3600 and navigate to the "Main" tab. Locate the "Waste Ink Counter" section and click "Set" to reset the values to zero. Important Safety Warnings

⚠️ Ensure you are using the correct version for your specific printer model. Attempting to reset a newer printer with an outdated version like V3600 can result in a "Mainboard Lock" which cannot be reversed without replacing hardware. System Requirements and Compatibility