Secure the green latch and push the side panel back. Perform a test print to verify alignment. Display Assembly (SM-320P Models) To assemble the pole display on DIGI SM-320P models, follow these steps:
Configure weighing patterns and barcodes through the system setup menu (Function -> System Setup -> Setting 15) to ensure compatibility with your POS system. Troubleshooting Common Error Codes
Proper initial setup ensures the longevity of the thermal print head and the accuracy of the load cells. Loading Label Rolls digi sm320 service manual
Route the label through the designated path and secure the end into the red take-up component.
Securely connect the serial cables between the scale and the pole, ensuring the latches click. Secure the green latch and push the side panel back
Load the label roll onto the spool, following the internal guide rails for orientation.
Remove the four stud screws from the bottom of the scale base. Load the label roll onto the spool, following
If your scale displays an error, first ensure it is on a level, stable surface and that the power supply is secure. SM-320 | Retail | DIGI America