Close the pressure counter-roller. Adjust the pressure to an intermediate value—too much can crush the wire, while too little causes slipping.
Proper setup is critical for maintaining a stable arc and preventing wire jams. decastar 150e manual top
The machine typically features a multi-step switch to adjust the welding current. Close the pressure counter-roller
Open the reel compartment door and secure the wire spool on the reel. Ensure the reel pulling pin is correctly housed. The machine typically features a multi-step switch to
While specific settings depend on material thickness, use these general guidelines for the DECASTAR 150E. Recommended Wire Shielding Gas 0.6mm - 0.8mm Solid CO2 or Argon/CO2 Mix Stainless Steel 0.8mm Stainless Argon + 1-2% Oxygen Aluminium 0.8mm - 1.0mm Almg/Alsi Pure Argon Outdoor Steel 0.9mm Flux-Cored None (Self-Shielded) Safety and Maintenance Tips Decastar - Weld Talk Message Boards