Daikin Brc1c51 61 Installation Manual <Top 50 ULTIMATE>

: Do not install the controller in areas with high moisture, direct sunlight, or near heat sources.

: Connect the two-core remote controller wire to terminals P1 and P2 on the controller's PCB. These terminals are not polarity sensitive , meaning the wires can be connected in either position. daikin brc1c51 61 installation manual

: Route the other end of the wire to the indoor unit and connect it to the corresponding P1 and P2 terminals on the unit's control board. : Do not install the controller in areas

: Install control wires at least 3.5 feet (1 meter) away from televisions or radios to prevent electrical noise interference. Installation Procedures : Route the other end of the wire

: If controlling multiple units, the remote is connected to the first unit, and subsequent units are daisy-chained via their P1/P2 terminals. Initial Setup and Configuration

Press the once to enter setting mode (the day will blink). Use the UP/DOWN buttons to select the day. Press RTC to confirm and move to the hour setting. Adjust the hours and minutes using the same method.

: Complex wiring and internal settings should be handled by a qualified technician.