[ Controller / M&K ] │ ▼ [ Cronus Zen ] ──(Runs GPC Scripts for Macros & Anti-Recoil) │ ▼ [ Raspberry Pi / Pico ] ──(Masks USB ID / Emulates Native Gamepad) │ ▼ [ Gaming Console ] ──(Sees only a valid native controller) Steps for Configuration Step 1: Update Cronus Zen Firmware Open Zen Studio on your PC.
Configuration Guide: Setting Up a Raspberry Pi with Cronus Zen cronus zen raspberry pi updated
Use a high-quality cable to link the top port of the Zen to the input port of the Raspberry Pi. [ Controller / M&K ] │ ▼ [
Connect your controller to the bottom-left USB port of the Cronus Zen. Enable the USB driver by adding dtoverlay=dwc2 to
Enable the USB driver by adding dtoverlay=dwc2 to /boot/config.txt .
Navigate to and set the Output Protocol to match your target platform (e.g., PlayStation 5 or Xbox Series X/S ). Step 2: Set Up the Raspberry Pi Linux Gadget