This usually means the client can't see the server. Check your LAN cables and ensure the CCBoot DHCP service is running. Blue Screen on Boot (BSOD)
In the context of CCBoot, an "image link" refers to the relationship between the stored on your server and the Client PCs that boot from it.
In the CCBoot Client interface, enter the Server IP and click "Upload Image." This creates a .vhd or .vhdx file on your server’s image disk. 3. Linking the Image to Client Groups Once the upload is finished: Open the (or Desktop) Server interface. Go to the Image Manager tab. ccboot image link
This often happens when linking an image to a PC with vastly different hardware than the Master PC.
One of the best features of CCBoot is the ability to link different images to different clients based on their usage. This usually means the client can't see the server
When you need to change a linked image, put one client into "Super Client" mode. Make your changes, shut down, and save the image. All other linked PCs will reflect the change on their next boot.
With proper linking and PnP (Plug and Play) management, one image can boot PCs with different motherboards or GPUs. Step-by-Step: Creating and Linking Your First Image 1. Preparing the Master PC Before you can link an image, you must create one. Install Windows on a "Master" PC with a hard drive. Install all necessary drivers and essential software. Install the CCBoot Client application. 2. Uploading the Image to the Server In the CCBoot Client interface, enter the Server
Right-click and select , then browse for the file you just uploaded. Navigate to Client Manager .
When you "link" an image to a client, you are essentially telling the CCBoot server to stream that specific OS environment to the client’s RAM over the network. This eliminates the need for local hard drives on every workstation. Why Linking Images Correctly Matters