Caselabs Sma8 Manual May 2026

Secure the tray using the thumb screws on the rear of the chassis. Radiator Support & Water Cooling Configurations

Up to 120mm of combined radiator and fan thickness. Bottom (Lower Chamber) Mount Format: Dual side-by-side mounts

Position fans to exhaust out the side ventilation panels. Front Mount Format: 120mm wide Maximum Size: Up to 360mm (3x120mm) caselabs sma8 manual

The SMA8 features a completely modular, screw-together design. Unlike riveted cases, you can strip it down to the bare frame using a standard Phillips #2 screwdriver. Main Chamber

The front panel uses CaseLabs' proprietary Flex-Bay system. You can swap bay covers for optical drives, reservoirs, or extra fan mounts without modifying the frame. If you'd like, let me know: Secure the tray using the thumb screws on

Features a removable divider plate to isolate heat from the main chamber.

Dedicated compartment for power supplies and heavy radiator configurations. Front Mount Format: 120mm wide Maximum Size: Up

The chassis exclusively uses 6-32 thread screws for the frame and M3 screws for specific drive mounts.

Align the vertical corner posts with the pre-drilled holes in the base. Secure each post using the provided 6-32 chassis screws.