In Love And Openness Install 2021 | Cadence Luxx

(Include an extra 10% for cuts and waste)

Start in the left corner of the room with the groove edge facing out toward the center.

and speed square (For scoring and snapping planks) Rubber mallet and tapping block (To safely lock joints) Pull bar (To tighten final planks against walls) Tape measure and chalk line (For room layout) Oscillating multi-tool (To undercut door jambs) 📋 Step-by-Step Installation Process 1. Acclimate and Prep the Space cadence luxx in love and openness install

Carefully remove existing baseboards and transition strips using a pry bar.

Ensure the subfloor is clean, dry, and flat within 3/16 of an inch over a 10-foot radius. Use a sander to knock down peaks, or apply a self-leveling underlayment to fill low spots. 2. Plan the Room Layout (Include an extra 10% for cuts and waste)

Use a chalk line to establish a straight starting line parallel to the longest wall. 3. Lay the First Row

(If your product does not have a pre-attached pad) 1/4-inch spacers (To maintain the required expansion gap) Ensure the subfloor is clean, dry, and flat

Align the short side of the next plank, drop it into position, and use a rubber mallet and tapping block to secure the joint. 4. Install the Subsequent Rows

Place 1/4-inch spacers along the wall to allow the floating floor to freely expand and contract.