Autodata 345 The Hardware Information Does Not Match With Your Dongle Link ((full)) May 2026

The software stores "Hardware ID" information in the Windows Registry. If these entries are deleted or modified, the link breaks.

Navigate to your Autodata installation folder (usually C:\ADCD2 ). Type the following commands, pressing Enter after each: regsvr32 ChilkatCrypt2.dll regsvr32 GenericLicensing.dll You should see a "Succeeded" message for each. 4. Run the "Sentinel" or Dongle Emulator Setup

For the most stable experience, install Autodata 3.45 on a Virtual Machine (like VMware) running Windows 7. This "freezes" the environment and prevents hardware mismatches. The software stores "Hardware ID" information in the

If your antivirus (including Windows Defender) has quarantined the emulator files, the "dongle link" will fail.

Are you seeing any specific alongside this message, or did this happen immediately after a Windows update ? Type the following commands, pressing Enter after each:

The "Hardware information does not match" error is almost always a breakdown in the . By restoring quarantined files, running as administrator, and re-running the emulator setup, you can usually get back to your wiring diagrams and service data in minutes.

Right-click and . This will re-install the virtual drivers that trick the software into thinking the physical dongle is present. 5. Check the System Date the hardware link may expire.

Some versions of Autodata 3.45 are "time-bombed." If your system date is set too far into the future, the hardware link may expire. Try setting your computer's clock back to and see if the software opens. If it does, you may need a "Time Stopper" utility to run the app permanently. Prevention Tips