Before downloading tools, you must confirm the hardware details. Using a generic formatter can permanently "brick" the drive.

Look for versions released after the date of your F/W 3613 (typically versions from 2013-2015 or newer).

Look for the (e.g., AU6989SN, AU6998) and the Flash ID Code .

The "Alcor Micro Unknown FA00 - F/W 3613" error is a common headache for users dealing with corrupted USB flash drives, generic thumb drives, and SD card controllers. This specific firmware (F/W 3613) and chip ID (FA00) indicate that your computer recognizes the hardware interface but cannot communicate with the memory chips inside, often resulting in a "Disk is Write Protected" or "Please Insert Disk" message.

Search for "AlcorMP" followed by your controller part number (e.g., "AlcorMP AU6989").

Download a tool called or Flash Drive Information Extractor . Plug in your USB drive.

The status bar will turn yellow (processing) and then green (pass). If it turns red, the memory chip itself might be physically dead. Troubleshooting Common Failures

Note down the (Vendor ID) and PID (Product ID)—usually 058F and 6387 for Alcor. Step 2: Download the Correct Alcor MPTool

4 Comentários

DEIXE SEU COMENTÁRIO

Seu e-mail não será publicado.


*


  1. Fa00 - F W 3613 !!link!! - Alcor Micro Unknown

    Before downloading tools, you must confirm the hardware details. Using a generic formatter can permanently "brick" the drive.

    Look for versions released after the date of your F/W 3613 (typically versions from 2013-2015 or newer).

    Look for the (e.g., AU6989SN, AU6998) and the Flash ID Code . alcor micro unknown fa00 - f w 3613

    The "Alcor Micro Unknown FA00 - F/W 3613" error is a common headache for users dealing with corrupted USB flash drives, generic thumb drives, and SD card controllers. This specific firmware (F/W 3613) and chip ID (FA00) indicate that your computer recognizes the hardware interface but cannot communicate with the memory chips inside, often resulting in a "Disk is Write Protected" or "Please Insert Disk" message.

    Search for "AlcorMP" followed by your controller part number (e.g., "AlcorMP AU6989"). Before downloading tools, you must confirm the hardware

    Download a tool called or Flash Drive Information Extractor . Plug in your USB drive.

    The status bar will turn yellow (processing) and then green (pass). If it turns red, the memory chip itself might be physically dead. Troubleshooting Common Failures Look for the (e

    Note down the (Vendor ID) and PID (Product ID)—usually 058F and 6387 for Alcor. Step 2: Download the Correct Alcor MPTool