Pro Manual !!exclusive!! — Airbot Hypersonic

Insert the metal extension tube into the main motor body until you hear a click.

This often indicates the filters were put back while still damp. Remove and clean the filters and allow the unit to air out. Safety Precautions Do not use the vacuum to pick up liquids or wet debris. Avoid vacuuming hot ashes, glass shards, or sharp objects.

Empty the dust cup after every cleaning session. Press the release latch to drop the bottom lid and discard debris. airbot hypersonic pro manual

Uses an infrared sensor to detect dust levels and automatically adjusts suction power. This is the most efficient way to clean, balancing power and battery life. Eco Mode: Best for light dusting on hard floors.

This is usually caused by a full dust cup or a dirty HEPA filter. Check that the seals are properly aligned. Insert the metal extension tube into the main

The device features an intelligent "Auto" mode alongside manual controls:

Maximum power for deep cleaning carpets or stubborn debris. Note that this mode drains the battery significantly faster. Maintenance and Cleaning Safety Precautions Do not use the vacuum to

Allow filters to air dry for at least 24 hours before reinserting. Using wet filters can damage the motor.